Buy Inflatable T-Rex Bouncy Castle with slide

The T-Rex bounce house is a true visual highlight. The T-Rex has the two palms firmly in its claws while children can happily bounce and slide inside the bounce house. The combination of bounce house and slide is particularly attractively designed here, as the slide starts and ends inside the bounce house. The little guests do not have to leave the castle, so the bounce house stays clean. The loving design and cute dinosaur motifs complete the design and make it uniquely detail-oriented. The roof over the slide and safety nets at all openings make the bounce house very safe for all uses.

The T-Rex Bouncy Castle with slide comes with a suitable transport bag and can be easily set up in about 10 minutes. The package includes the bouncy castle, a transport bag, and a repair kit. Please note that the blower and the groundsheet are not included. You can find them in our accessories category. Both offered blowers (Huawei and Gibbons) are suitable for the bouncy castle.

Made of robust PVC tarpaulin (0.55 mm / 621.3 g/sqm) and certified according to DIN EN 14960, the T-Rex Bouncy Castle with slide is a quality product that meets the highest safety standards.

Please use the bouncy castle only on suitable groundsheet to protect it from sharp objects on the ground and from abrasion. We recommend setting up the bouncy castle on a grassy area and securing it with our ground anchors to ensure maximum safety. After each use, the bouncy castle should be dried and properly packed to protect it from external influences and transport damage.

Details of the T-Rex Bouncy Castle with slide

• Dimensions (L x W x H): 5.00 m x 4.00 m x 3.20 m *
• Jumping area (L x W): 3.60 x 2.40 m *
• Height of the slide: 1.40 m plus 60 cm floor height *
• Weight: approx. 100 kg *
• Packing size: 80 x 80 x 110 cm *
• Setup time: 10 minutes
• Material: PVC (0.55 mm / 621.3 g/sqm)
• 2-4 times stitched (depending on usage)
• Fire-retardant
• Certificate of conformity according to EN 14960
• Bouncy surface with protective stripes, zipper with velcro cover, corners reinforced

Included in the package: bouncy castle, transport bag & repair kit

The T-Rex Bouncy Castle with slide is a professional module that is manufactured and tested according to the strict guidelines of DIN EN 14960, which means it is safe and reliable. Therefore, the T-Rex Bouncy Castle with slide is perfect for professional rental use. Please note that only children are allowed on the bouncy castle, no adults!

Please note that the blower (not included) must run continuously during use and a small air outlet through the holes is necessary to prevent the bouncy castle from bursting.

Get the T-Rex Bouncy Castle with slide now and experience unforgettable moments full of fun and adventure!

* Weight and dimensions are approximate and may vary slightly.